Top Ads

monetag

monetag
get money from your ads in bloge
Home / / ASHRAE Standard 126-2016 Method of Testing HVAC Air Ducts

ASHRAE Standard 126-2016 Method of Testing HVAC Air Ducts



ASHRAE  Standard 126-2016


من اهم  الاعمال المسئول عنها مهندس الموقع في مجال  HVAC   هي الاختبارات  علي  دكتات الهواء  ومن اهم الاكواد  الي

بتتكلم عن النقطه دي  SMACNA    و ASHRAE
ASHRAE,DUCT,FITTING,SMACNA,HVAC,MEP,STANDARD126







INTRODUCTION TO STANDARD 

First published in 2000, Standard 126 is a joint project of ASHRAE and the Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA). It was created to provide

methods of testing to determine the strength and durability characteristics of HVAC ducts under various loading and environmental conditions. The intent of Standard 126 is to address all duct shapes and materials. To the project committee’s knowledge, no other publication addresses all of
the structural and durability tests as comprehensively as this standard, although individual tests are covered under other standards.
A standardized set of comprehensive tests is used to ensure that products meet minimum structural requirements, and to allow products to be compared to one another. Such tests should simulate structural stresses that the duct will experience in service and facilitate the application of safety
factors. These tests include pressurizing the ductwork, applying superimposed loads, dropping weighted implements for impact or puncture, applying tension to the duct, bending
flexible duct 180 degrees, subjecting the ductwork to temperature and humidity changes, and bursting or collapsing the duc twork under pressure. After an individual test or a series
of tests, leakage tests may be conducted to determine the effect of a structural or durability test on a specimen. During a test or series of tests, the ductwork is observed to determine
if there is degradation and permanent damage. Pass/fail criteria are determined by the sponsoring
agency, code officials, or other users of this standard. Recommended acceptance criteria are provided in Informative Annex C.


1. PURPOSE
This standard provides laboratory test procedures for the evaluation of HVAC air ducts.

2. SCOPE


2.1 This standard shall be used to determine the structural strength, dimensional stability, durability, and leakage characteristics of HVAC air ducts.

2.2 This standard does not address the following:
a. Fittings
b. Effects of aerosols, solid particulates, corrosive environments, or combustibility
c. Long-term effects of extended service
d. Seismic qualifications
e. Underground ducts
f. Plenums and equipment casings



DOWNLOAD





Share

11 comments

  1. ممكن اعادة رفع الملف على قوقل درايف

    ReplyDelete
  2. I'm glad I found this web site, I couldn't find any knowledge on this matter prior to.Also operate a site and if you are ever interested in doing some visitor writing for me if possible feel free to let me know, im always look for people to check out my web site. furnace replacement calgary

    ReplyDelete
  3. The machine creates sufficient power to break the example, in a fast or moderate approach to copy the activity of power in real field conditions. tensile strength testing machine

    ReplyDelete
  4. The machine creates sufficient power to break the example, in a fast or moderate approach to copy the activity of power in real field conditions.HVAC contract sales tips

    ReplyDelete
  5. New York General Dentistry emphasizes the importance of a healthy smile. With offices in Manhattan and Brooklyn, the practice provides extensive dental care ranging from preventive care to recovery and cosmetic dentistry. It also offers implant dentistry. Dr. Ina Cheron has been working in the field of dentistry since the age of 15 and she hopes to change people's perceptions about the profession. He has been a dental hygienist since the age of fifteen and has a real passion for the field. Here is information about general dentistry, read on for more information.

    ReplyDelete

All Rights Reserved To WIKI MEP 2018 © Design By CNMU